Follow

Install Ink Ribbon and Tag Roll for Sato Printer

Below is a video on how to properly install the ink ribbon and tag roll into the Sato printer.

Video: Install tags roll

Video: Install Ribbon

To ensure the print is properly aligned on the tags, make sure the tags are pushed to the edge of the print head guide and the feed guides in the back are also pressed securely against the tags.

Print_head_guide.jpgPrinter_Tag_Guides.jpg

 

Please note: TJS tags over the top of the roll and then down into the print head. The ribbon also rolls over the top of the roll before going through the print head and back up to the ribbon feeder roll.

Screen_Shot_2018-05-14_at_11.23.40_AM_copy.png

0 Comments

Article is closed for comments.