Clean RFID Printer or Clear Debris from Print Head

If tags are printing unevenly with gaps in the ink, there may be debris stuck in the exiting roll of the Print head or the printer may require cleaning. Use the video below as a guide to Clean the Print Head

Video: Clean Sato CL4NX Printer

Things to Note:

  1. Make sure the Print head and exit roll are clear of debris, anything that causes the tags to come out uneven will cause blemishes on the printout.

  2. When replacing the Exit roll, make sure the two bronze tabs are pointed upward so the roll will slide back into place (this can be difficult because they will rotate freely from the other one.)



Article is closed for comments.